woktheblue
Solid State Member
- Messages
- 10
Hello everyone on this helpful forum. I still have this same problem. When I try booting up my computer the bios only detects one of my DVD-ROM drives and not my hard drive. When I disconnect both of my DVD-ROM (DVD-RW) drives the computer then picks up the hard drive. I have tried everything to sort this problem outÂ…
I have been in the bios and tried auto detect and manually. I have also changed jumper setting and tried new data cables. I have since taken my motherboard back the shop and they replaced it for a new board which is the same as the previous one I had. I have changed memory, fitted a new power supply. Tried a spare hard drive!!! It’s so frustrating... I am wondering now if it has anything to do with my CPU, Celeron 2.00GHZ which I took from a previous computer of mine. “BUT the computer works great with out the DVD-ROM’s”.
What comes up in the post screen is: "Verifying DMI pool data... Disk boot failure, Insert system disk and press enter".
IDE Channel 0 Master [ None ]
IDE Channel 0 Slave [ None ]
IDE Channel 1 Master [ DVD-ROM ]
IDE Channel 1 Slave [ None ]
Motherboard: GigaByte technology co ltd, Ga-8s661fxmp-rz
Bus Clock: 100 megahertz
BIOS: Award modular bios v6.00pg 09/27/04
Chipset: sis661 rev17
CPU: Celeron 2.00GHZ
Windows XP Home Edition
Nvidia Geforce 4 MX 440
WD 80gb Hard Drive
Memory: 1024mb on slot A1
Power Supply: 350 watts
Thank you very much if you can HELP! mark
I have been in the bios and tried auto detect and manually. I have also changed jumper setting and tried new data cables. I have since taken my motherboard back the shop and they replaced it for a new board which is the same as the previous one I had. I have changed memory, fitted a new power supply. Tried a spare hard drive!!! It’s so frustrating... I am wondering now if it has anything to do with my CPU, Celeron 2.00GHZ which I took from a previous computer of mine. “BUT the computer works great with out the DVD-ROM’s”.
What comes up in the post screen is: "Verifying DMI pool data... Disk boot failure, Insert system disk and press enter".
IDE Channel 0 Master [ None ]
IDE Channel 0 Slave [ None ]
IDE Channel 1 Master [ DVD-ROM ]
IDE Channel 1 Slave [ None ]
Motherboard: GigaByte technology co ltd, Ga-8s661fxmp-rz
Bus Clock: 100 megahertz
BIOS: Award modular bios v6.00pg 09/27/04
Chipset: sis661 rev17
CPU: Celeron 2.00GHZ
Windows XP Home Edition
Nvidia Geforce 4 MX 440
WD 80gb Hard Drive
Memory: 1024mb on slot A1
Power Supply: 350 watts
Thank you very much if you can HELP! mark