ExplosiveAFI
Beta member
- Messages
- 2
I recently switched out my old motherboard and processor for a new one, and after I plugged everything back in and all, it will not power on.. When I hit the master switch in the back of the case, the PSU fan spins for a little bit, and I can get power to my monitor, but when I hit the button on my case to turn on the PC, nothing happens..
I'm thinking I may have plugged in the "Power Switch" cable incorrectly, but I don't know how to tell if I did..
I plugged it into the slot with 4 pins that was called "POWER", but the cable that I had to plug in only had two slots in it, so there are like 4 possible ways I can plug it in..
Same thing with the reset switch..
Thanks, Zack
I'm thinking I may have plugged in the "Power Switch" cable incorrectly, but I don't know how to tell if I did..
I plugged it into the slot with 4 pins that was called "POWER", but the cable that I had to plug in only had two slots in it, so there are like 4 possible ways I can plug it in..
Same thing with the reset switch..
Thanks, Zack