Bluescreen HW failure? System Error ID 1003 - Page 2 - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Hardware Repairs and Troubleshooting
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 04-30-2009, 10:41 PM   #11 (permalink)
Call me Mak or K
Mod Emeritus
 
KSoD's Avatar
 
Join Date: Sep 2004
Location: C:\
Posts: 35,647
Default Re: Bluescreen HW failure? System Error ID 1003

Bug Check 0x8E: KERNEL_MODE_EXCEPTION_NOT_HANDLED

Resolving the Problem

If you are not equipped to debug this problem, you should use some basic troubleshooting techniques:
  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video adapters.
  • Check with your hardware vendor for any BIOS updates.
  • Disable BIOS memory options such as caching or shadowing.
If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.
If exception code 0x80000003 occurs, a hard-coded breakpoint or assertion was hit, but the computer was started with the /NODEBUG switch. This problem should rarely occur. If it occurs repeatedly, make sure that a kernel debugger is connected and that the computer is started with the /DEBUG switch.
If exception code 0x80000002 occurs, the trap frame supplies additional information.
If you do not know the specific cause of the exception, consider the following items:
  • Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
  • Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.
If the bug check message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the system by using the Recovery Console and then deleting the offending system service file.
Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x1E. You can disable memory caching of the BIOS to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.
The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and .chk files that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation.
You can resolve BIOS problems by upgrading the system BIOS version.
__________________

__________________
I do not accept support questions via EMail, PM, IM or my G+ page!

Phone: LG Optimus G Pro
Running: Stock JB from LG with Nova Launcher

KSoD is offline  
Old 05-03-2009, 05:18 PM   #12 (permalink)
Newb Techie
 
Join Date: Apr 2009
Posts: 6
Default Re: Bluescreen HW failure? System Error ID 1003

I cant access the windows recovery console, i put in my XP disc but itll boot up to the windows xp professional setup where im given the options of deleting the partition, installing windows and creating a new partition. I hit R but nothing happens. Also as of now I cant boot into safemode, i get the BSOD when i go into safemode.
__________________

tjnguyen is offline  
Old 05-03-2009, 10:30 PM   #13 (permalink)
Newb Techie
 
Join Date: Apr 2009
Posts: 6
Default Re: Bluescreen HW failure? System Error ID 1003

Okay i just ran chckdsk /r i found out how to do a recovery console, now i am able to get back into safemode without gettin the blue screen error, and i can boot into normal mode but after like 5 minutes now itll give me the error then reboot. here is my mini dump files, take a look at it please.
MEGAUPLOAD - The leading online storage and file delivery service
__________________

tjnguyen is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Issue with BF2 on my E510 dykzeulb PC Gaming 8 10-21-2007 04:26 PM
AVG Threat in System Volume Info? MikesCreation Viruses, Spyware and Malware 1 08-23-2007 07:47 AM
AMD Athlonô 64 X2 Dual Core Processor Utilities & Updates Osiris Overclocking and Modding 6 05-31-2007 01:41 PM
User Locked Out of Account....Its Weird Though.... qbbraveheart Computer Networking and Internet Hardware 2 05-07-2007 09:58 AM



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.