Hello all,
On my other PC I am having problems booting up 1st time. It sometimes just sits on the DFI logo screen for ever, and after a few reboots/ shut downs it gets to a blue screen (for 2 days in a row now) with the following message :
BAD_SYSTEM_CONFIG_INFO
Windows has shut your PC down to prevent damage blah blah..
Try removing/ disabling any new hardware/software or disable bios memory options such as Caching or shadowing.
Well after another reboot from that screen I get the option to start safe mode, start normally, last settings that worked... so I choose "last settings that worked" and boots up fine.
Had this 2 days in a row now and am wanting to get this fixed once I know the problem.
I DO have it overclocked but has been OK so far, although 1 error on prime 95 that I have not been able to fix... might be that?
It has only recently started happening since I enabled memory divider it seems to 180 9/10 memory @198 Mhz CPU 2580Mhz. HTT 215, LDT x4 Multiplier X12. Before divided was 1:1 and worked fine except the error in prime 95.
What should I try and do next? How can I find out for sure whats wrong here.
And following from a previous post of mine about CPU voltage/ dividers ... now that I have seen that a divider doesnt remove error from prime 95, shall I try increasing voltage?
Thanks for any input
Termy
On my other PC I am having problems booting up 1st time. It sometimes just sits on the DFI logo screen for ever, and after a few reboots/ shut downs it gets to a blue screen (for 2 days in a row now) with the following message :
BAD_SYSTEM_CONFIG_INFO
Windows has shut your PC down to prevent damage blah blah..
Try removing/ disabling any new hardware/software or disable bios memory options such as Caching or shadowing.
Well after another reboot from that screen I get the option to start safe mode, start normally, last settings that worked... so I choose "last settings that worked" and boots up fine.
Had this 2 days in a row now and am wanting to get this fixed once I know the problem.
I DO have it overclocked but has been OK so far, although 1 error on prime 95 that I have not been able to fix... might be that?
It has only recently started happening since I enabled memory divider it seems to 180 9/10 memory @198 Mhz CPU 2580Mhz. HTT 215, LDT x4 Multiplier X12. Before divided was 1:1 and worked fine except the error in prime 95.
What should I try and do next? How can I find out for sure whats wrong here.
And following from a previous post of mine about CPU voltage/ dividers ... now that I have seen that a divider doesnt remove error from prime 95, shall I try increasing voltage?
Thanks for any input
Termy