Problem is with getting things to run at the correct speed.
Yes, I know this hardware is out of date but this is just a
backup machine.
Mainboard: ECS K7S5A
CPU: AX1700DMT3C
RAM: 1.0 gBytes PC2700
Video: Savage4 GPU M398-16mb 4X
CPU is now running at 1.1 gHertz. Should be 1.47.
System and RAM are set at clock speed of 100.
Setup will allow you to change them both to 133, but!
At 133 the computer appears to boot up normally but with no
video output. At least the lights on the case follow the usual
pattern but nothing on the screen.
Suggestions?
Yes, I know this hardware is out of date but this is just a
backup machine.
Mainboard: ECS K7S5A
CPU: AX1700DMT3C
RAM: 1.0 gBytes PC2700
Video: Savage4 GPU M398-16mb 4X
CPU is now running at 1.1 gHertz. Should be 1.47.
System and RAM are set at clock speed of 100.
Setup will allow you to change them both to 133, but!
At 133 the computer appears to boot up normally but with no
video output. At least the lights on the case follow the usual
pattern but nothing on the screen.
Suggestions?
