buckman341
In Runtime
- Messages
- 119
I am currently using a single Seagate Barracuda 7200 SATA 3.0Gb/s drive on a EVGA nForce 680i SLI ATX Intel Motherboard.
I would like to add another drive to this setup to run a RAID1 mirrored array. I'm about 99% sure this is possible but having never tried it myself I thought I would ask for some advice and help. Is there a special procedure for this? What kind of setup and software will I need to get this rolling?
Thanks for any help.
I would like to add another drive to this setup to run a RAID1 mirrored array. I'm about 99% sure this is possible but having never tried it myself I thought I would ask for some advice and help. Is there a special procedure for this? What kind of setup and software will I need to get this rolling?
Thanks for any help.
