Techist - Tech Forum

Techist - Tech Forum (http://www.techist.com/forums/)
-   New Systems | Building and Buying (http://www.techist.com/forums/f76/)
-   -   Tested D0 intel i7 920 (http://www.techist.com/forums/f76/tested-d0-intel-i7-920-a-214348/)

Solaxys 08-23-2009 12:45 AM

Tested D0 intel i7 920
 
I used intel burn test on i7 920 D0, evga x58 classified, 6GB corsair dominator, corsair 1000W, and thermaltake 120 extreme Rev B.

here's the data.

http://img269.imageshack.us/img269/6096/98751233.jpg

I don't think that's normal... for a standard test. Iunno, someone confirm/tell me what to do to make it better...

Hefemeister 08-23-2009 12:48 AM

Re: Tested D0 intel i7 920
 
What are your ambient temps?

Solaxys 08-23-2009 12:51 AM

Re: Tested D0 intel i7 920
 
how do I find those out...

yzmxer608 08-23-2009 12:57 AM

Re: Tested D0 intel i7 920
 
Ambient temps is the temperature of the area your computer is in, most likely the temperature of the room your computer is in. Can find that out with thermometers.

Solaxys 08-23-2009 01:06 AM

lol I don't think I have a thermo handy atm - but should be 29/30 C

I physically touched the heatpipes of the thermalright and followed them as close as I can get to the CPU (computer is on) - the pipes are below body temp...

so I am assuming I installed it incorrectly...

Hefemeister 08-23-2009 01:35 AM

Re: Tested D0 intel i7 920
 
Yeah a 15C delta from ambient to idle temps is a bit much for a true at stock speeds. I would remount.

I would hope for around an 8C delta. So assuming 30C ambient I would want to see 38-40C idle with a load temp around 55C to 58C.

Solaxys 08-23-2009 01:43 AM

Re: Tested D0 intel i7 920
 
how do I remount - as in how to reapply thermal paste?

should I get propanol and cutip the old out and then redo it?

Hefemeister 08-23-2009 01:47 AM

Re: Tested D0 intel i7 920
 
rubbing alcohol and a coffee filter works good. Just make sure you so not use too much paste when reapplying. a very thin layer on the cpu is plenty. About a rice grain size ob paste.

What paste are you using? TX-2 is really good if you need some new paste.

Solaxys 08-23-2009 02:02 AM

Re: Tested D0 intel i7 920
 
I am using Arctic Cooling MX 2

Hefemeister 08-23-2009 02:04 AM

Re: Tested D0 intel i7 920
 
That should be just fine.


All times are GMT -5. The time now is 05:36 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.