PSU Question

[blasterfreak88]

I currently an running a single gtx 260 (not the 216 core) gpu and I am conisdering picking up a second one to go sli. I currently have the ocz 600 watt psu and I dont think it will be enough power will it? If not what size should I move up to. Thanks

 

[patonb]

It actually might be.. question though, is there 4 pci-e cables? whats the Amps?

I run 260-216 sli on a 700W Silverstone psu. I run FaH 24/7 and have no gliching.

I did breifly have my 520hx running them with aDAPTERS, BUT THAT WAS JUST FOR FUN...

 

[blasterfreak88]

It only has 2 connectors for pcie.

Here are the specs
150 x 140 x 86mm (W x L x H)
ATX12V v2.2 and EPS12V 80% @ 115V (Typical load)
83% @ 230V (Typical load)
Overvoltage / Overcurrent / Short-Circuit protection
Active PFC
MTBF:100,000 hours
100~240Vac 10-5A 50/60Hz
Maximum ratings are shown. The combined output of all 12V rails is 72A at ambient room temperature of 20 C.

 

[95BlackGA]

It only has 2 connectors for pcie.

Here are the specs
150 x 140 x 86mm (W x L x H)
ATX12V v2.2 and EPS12V 80% @ 115V (Typical load)
83% @ 230V (Typical load)
Overvoltage / Overcurrent / Short-Circuit protection
Active PFC
MTBF:100,000 hours
100~240Vac 10-5A 50/60Hz
Maximum ratings are shown. The combined output of all 12V rails is 72A at ambient room temperature of 20 C.

I'm guessing you're looking at the OCZ StealthXStream 600W PSU? It's SLI ready, and should be able to handle 2 260's. It has 4 12V rails each at 18amps. You'll ned 6-pin to 4pin molex adapters, so wire management may be a pain.

Yes, you'll do just fine with it.

 

[patonb]

Yha, you should be fine... I'd suggest 1 pci-e and 1 adapter per card.