parts have arrived! - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > New Systems | Building and Buying
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 05-30-2007, 05:54 PM   #1 (permalink)
Monster Techie
 
Join Date: Jan 2007
Posts: 1,046
Default parts have arrived!

the parts i ordered has arrived and i have the slightest idea on where to start.

Ill figure it out ill ask questions if i need to hehe.
__________________

__________________
PINOY3000
Aluminum Unibody MacBook
Q6600 @ 3.0 GHz 333MHz x 9 Multiplier VCore: 1.3V
NVidia GeForce 8800GTS 640MB; G.Skill 6GB-HZ 1000MHz 5-5-5-15 1.9V
WD Raptor-X 150GB 10,000RPM; Seagate Barracuda 320GB 7,200RPM
ASUS P5B Deluxe Wifi Edition; Thermaltake Armor Full Tower Case
Logitech G15 Keyboard & G5 Mouse; Bose Companion 5 Speakers
Antec Quattro 850-Watt PSU; Tuniq Tower 120 HSF, Blu-Ray Drive
Gateway 22" FPD2275W LCD Display; MS Windows Vista Premium 64-Bit
Samsung 40" 1080p Full HD LCD TV (Samsung LN40A550)
pinoy3000 is offline  
Old 05-30-2007, 06:00 PM   #2 (permalink)
Retired.
 
peterhuang913's Avatar
 
Join Date: Dec 2005
Location: Los Angeles, California
Posts: 8,076
Send a message via AIM to peterhuang913
Default Re: parts have arrived!

take pictures!!! you will cherish it in the future!!
__________________

__________________


My computer uses 1.5A-load, .8A-idle, .65A-standby, .05A-turned off on 125V.
"The spaces between your fingers were created so that another's could fill them in."
Quote:
Originally Posted by Norcent View Post
I need to stop using the internet.
peterhuang913 is offline  
Old 05-30-2007, 06:09 PM   #3 (permalink)
Renowned Budgeting Master
 
Join Date: Nov 2006
Location: Uniontown, PA
Posts: 4,153
Send a message via AIM to Sora
Default Re: parts have arrived!

Start by putting any aftermarket fans or things to your case. Then put in the motherboard. Then put in your CPU and mount the heatsink. Then I suggest the ram and then the harddrive and then the Video card/ PCI cards. Then put in the opticals or something and connect all your cabled and close your case. The end lol
__________________
E6300 w/ Arctic Freezer Pro 7 @ 3.6ghz 1.4Vcore
Antec 900 Case
EVGA 750i FTW Mobo
4x1GB of G.skill DDR2-800
2 8800GT in SLI
22" Samsung Syncmaster
1 250GB WD and 1 Seagate 7200.10 in RAID 0
Corsair 520HX 3DMark06 Score: 13900
Sora is offline  
Old 05-30-2007, 06:16 PM   #4 (permalink)
Retired.
 
peterhuang913's Avatar
 
Join Date: Dec 2005
Location: Los Angeles, California
Posts: 8,076
Send a message via AIM to peterhuang913
Default Re: parts have arrived!

lmao, nice one Sora but I think he can figure out how to put a computer on. dont forget thermal paste...
__________________


My computer uses 1.5A-load, .8A-idle, .65A-standby, .05A-turned off on 125V.
"The spaces between your fingers were created so that another's could fill them in."
Quote:
Originally Posted by Norcent View Post
I need to stop using the internet.
peterhuang913 is offline  
Old 05-30-2007, 06:21 PM   #5 (permalink)
Renowned Budgeting Master
 
Join Date: Nov 2006
Location: Uniontown, PA
Posts: 4,153
Send a message via AIM to Sora
Default Re: parts have arrived!

I felt like making a smart reply haha.
__________________
E6300 w/ Arctic Freezer Pro 7 @ 3.6ghz 1.4Vcore
Antec 900 Case
EVGA 750i FTW Mobo
4x1GB of G.skill DDR2-800
2 8800GT in SLI
22" Samsung Syncmaster
1 250GB WD and 1 Seagate 7200.10 in RAID 0
Corsair 520HX 3DMark06 Score: 13900
Sora is offline  
Old 05-30-2007, 06:24 PM   #6 (permalink)
Retired.
 
peterhuang913's Avatar
 
Join Date: Dec 2005
Location: Los Angeles, California
Posts: 8,076
Send a message via AIM to peterhuang913
Default Re: parts have arrived!

use a penny as the "heat transfer medium" between the cpu and the heatsink
__________________


My computer uses 1.5A-load, .8A-idle, .65A-standby, .05A-turned off on 125V.
"The spaces between your fingers were created so that another's could fill them in."
Quote:
Originally Posted by Norcent View Post
I need to stop using the internet.
peterhuang913 is offline  
Old 05-30-2007, 07:23 PM   #7 (permalink)
Super Techie
 
Riznarf's Avatar
 
Join Date: May 2007
Posts: 471
Send a message via AIM to Riznarf
Default Re: parts have arrived!

Quote:
use a penny as the "heat transfer medium" between the cpu and the heatsink
wait....really? over thermal paste?
__________________
-Riznarf

ASRock H67M
i7-2500k @ 3.30
eVGA gtx 570 @ 880/1000
2x 4gb G.Skill Ripjaws DDR3-1333
Corsair 600w PSU
3DMark 11: 6595
Riznarf is offline  
Old 05-30-2007, 07:26 PM   #8 (permalink)
Retired.
 
peterhuang913's Avatar
 
Join Date: Dec 2005
Location: Los Angeles, California
Posts: 8,076
Send a message via AIM to peterhuang913
Default Re: parts have arrived!

The typical silicone and zinc oxide thermal compound has thermal conductivity between 0.7 and 0.9 W/(m·K) (in comparison, copper is 401 W/(m·K))
__________________


My computer uses 1.5A-load, .8A-idle, .65A-standby, .05A-turned off on 125V.
"The spaces between your fingers were created so that another's could fill them in."
Quote:
Originally Posted by Norcent View Post
I need to stop using the internet.
peterhuang913 is offline  
Old 05-30-2007, 09:21 PM   #9 (permalink)
Super Techie
 
shan1784's Avatar
 
Join Date: May 2007
Location: Michigan
Posts: 396
Default Re: parts have arrived!

Quote:
Originally Posted by peterhuang913 View Post
The typical silicone and zinc oxide thermal compound has thermal conductivity between 0.7 and 0.9 W/(m∑K) (in comparison, copper is 401 W/(m∑K))

Ok, is this for real??? Don't want to take over the post or anything but I have never heard of this anywhere...
shan1784 is offline  
Old 05-30-2007, 09:25 PM   #10 (permalink)
Renowned Budgeting Master
 
Join Date: Nov 2006
Location: Uniontown, PA
Posts: 4,153
Send a message via AIM to Sora
Default Re: parts have arrived!

I have never heard this either..
__________________

__________________
E6300 w/ Arctic Freezer Pro 7 @ 3.6ghz 1.4Vcore
Antec 900 Case
EVGA 750i FTW Mobo
4x1GB of G.skill DDR2-800
2 8800GT in SLI
22" Samsung Syncmaster
1 250GB WD and 1 Seagate 7200.10 in RAID 0
Corsair 520HX 3DMark06 Score: 13900
Sora is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice on Purchasing Computer - XPS 710 or what Parts Ragnos New Systems | Building and Buying 41 06-03-2007 05:15 PM
Advise With Upgrading Parts Rowan_7 New Systems | Building and Buying 5 05-30-2007 06:05 PM
Bought the other parts, just need to wait for the newegg parts :D pinoy3000 New Systems | Building and Buying 4 05-26-2007 09:24 AM
Good Used Parts - Old Stuff Fastvan67 Buy/Sell/Trade and Hot Deals 0 04-29-2007 12:22 AM
Some Computer Parts. __Camouflage__ Buy/Sell/Trade and Hot Deals 5 04-19-2007 02:01 AM



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.