New build: strange issues

Status
Not open for further replies.

Raknor

In Runtime
Messages
142
Hey guys,

I recently put together this build:

i7-2600k
Asus p8z68 V Pro
8gb crucial ram
Nvidia 480gtx
1tb hitachi Sata drive
antec water cooler

My problem is specifically related to severe under performance in prime 95: which appears to fail immediately after starting. Add to that a rather poor mark in 3d mark11. Anytime i try to change a setting in the bios I get a BSOD. If I try to use turbo mode in the included ASUS software I get bsod. I updated the original bios but still no change. I ran checkdisk just to make sure the hdd was good, it passed. I also recently ran memtest86 and my memory passed everything except test 7 the block test.

Is this one failure enough to lead to all my problems?

The only other thought I had is that it could be that my powersupply is too low. Its 600 watts. Is that too low for my system? Any thoughts would be greatly appreciated as I am getting very frustrated :)
 
What brand is your power supply?
A low quality power supply, regardless of wattage, could cause some odd issues.

What are your temps then running Prime 95?
What does Prime 95 say when it fails?
Are you overclocked? If so, revert to defaults.
 
Status
Not open for further replies.
Back
Top Bottom