PolishXlion
Baseband Member
- Messages
- 23
- Location
- Poland
Specs:
AMD FX 4130(stock fan)
MOBO:Gigabyte Ga 990FxaUD3
8 GB of 2x4 good ram at 1600 MHz
asus gtx 770 OC edition
Seagate 1 tb drive
Zalman z11 plus case.
be quiet dark rock 600 watt power supply
I just built this Pc and I fear the PSU is dead on arrival. I connectrd everythkng up in the case ans when I tried to turn it on nothing happened. I realzed that the CPU pins were out so I connected rhem and them and reconnected the 24 pin. I later realized that all fans are connected tothe MOBO except for one MOLEX. That is when I realized the MOBO is probably not the fault. I will u0load picutred later. Basically if the MOBO is dead the MOLEX fan should start up but it still does not. I connected everything and I am 99 percent sure it is all correct.
AMD FX 4130(stock fan)
MOBO:Gigabyte Ga 990FxaUD3
8 GB of 2x4 good ram at 1600 MHz
asus gtx 770 OC edition
Seagate 1 tb drive
Zalman z11 plus case.
be quiet dark rock 600 watt power supply
I just built this Pc and I fear the PSU is dead on arrival. I connectrd everythkng up in the case ans when I tried to turn it on nothing happened. I realzed that the CPU pins were out so I connected rhem and them and reconnected the 24 pin. I later realized that all fans are connected tothe MOBO except for one MOLEX. That is when I realized the MOBO is probably not the fault. I will u0load picutred later. Basically if the MOBO is dead the MOLEX fan should start up but it still does not. I connected everything and I am 99 percent sure it is all correct.
Last edited: