Well after 4 days of assembling and dismantling, and re-assembling. It is complete. I am extreamly happy with the build and the components. I ran some tests and it seems to be able to stay between 28-35 degrees C between idle and load. I used 3dmark03 and it gave me 24340 points when I ran it. So without further ado, here's the pics.
Front of the case.
Picture with the flash turned on.
No Flash, side shot
All of the cables are routed behine the 3.5 bays, all except the round IDE cable, that one is off to the side as much as I can get it.
I just like the fan.
Thanks to everyone for their help in choosing good parts and for the help with the actual build.
Front of the case.
Picture with the flash turned on.
No Flash, side shot
All of the cables are routed behine the 3.5 bays, all except the round IDE cable, that one is off to the side as much as I can get it.
I just like the fan.
Thanks to everyone for their help in choosing good parts and for the help with the actual build.