So some of you might remember me i told everyone about my build
(some things are different but not a lot), WELL ITS COMPLETE! I am very excited as i ran into virtually NO ISSUES what so ever. *KNOCK ON WOOD*
I do have some questions though, i researched a lot before i built this computer and i knew this MOBO sets my ram to about 1033hz or w.e when my ram is rated for 1600 so i force set it on the MOBO i also know the ram runs at about 1.65v so i set the DRAM voltage to 1.64 as it would not let me run the 1.65. It reads the ram PERFECTLY and everything is fine just want to know about the timings. LINK TO THE RAM
... How do i set the timings manually because i am pretty sure i found i setting in the bios to alter them but i have no idea what the 8-8-8-8-24 stuff means. but i see in my bios it is reading it as like 9-9-9-9-24
Sorry for the sloppy post but super excited!!!
p.s. for those who have been following and helping me thanks a million!!! (The laptop SSD works great but i electrical taped it to my HAF 932 HDD bays as its super tiny and i had no idea what to do!)