installing 9800gtx - no signal to monitor

Status
Not open for further replies.
yes. does your board have onboard vid if it does you might have to dis able that. cause it might have defaulted back to that. try putting the old card back in and uninstall driver then throw 9800gtx+ back in and try it. also look in bios for an option like first display device should say something like pci, pci-x, and if you have onboard it will say on board. be shure pci-x is selected for first display device
 
drivers should have nothing to do with anything upon booting, no drivers are even loaded until your os loads

do what philbar suggested, check out your bios settings, see if it defaulted back to onboard (if it has onboard)

worst case scenario... the cards a dud and you need to RMA it
 
Status
Not open for further replies.
Back
Top Bottom