Using a p5w dh board with my conroe build. Board alone plugged into power will not give any audible beeps at all with out without cpu installed.
I should get 3-7 beeps with a bare board should I not? I installed all the hardware and was ready to roll and got nothing upon power up. So I started unhooking and have tested all the way down to the bare board and still get no beeps. I have tried 3 different working speakers and the same result . It is hooked correctly to the board. If I get no beeps with a bare board I would think it is the board with the problem. I have build 10-15 boxes with Asus boards over the last few years and have not had the first problem so I want to make sure it is the board before I send it back. I have checked over the jumpers on the board and they are all in their default setting. Cannot think of much else to do so I was looking for some ideas from you guys.
If you can think of something please let me know.
Thanks
I should get 3-7 beeps with a bare board should I not? I installed all the hardware and was ready to roll and got nothing upon power up. So I started unhooking and have tested all the way down to the bare board and still get no beeps. I have tried 3 different working speakers and the same result . It is hooked correctly to the board. If I get no beeps with a bare board I would think it is the board with the problem. I have build 10-15 boxes with Asus boards over the last few years and have not had the first problem so I want to make sure it is the board before I send it back. I have checked over the jumpers on the board and they are all in their default setting. Cannot think of much else to do so I was looking for some ideas from you guys.
If you can think of something please let me know.
Thanks