Will this ram/gfx card work for my system???

Status
Not open for further replies.

urbanLEGEND

Beta member
Messages
1
Gfx card : http://www.amazon.com/VisionTek-Rade...3043502&sr=8-9
Ram : http://www.newegg.com/Product/Produc...82E16820148346

System specs:

Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
AMD Phenom II X4 955 49 °C
Deneb 45nm Technology
RAM
4.00 GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co., Ltd. GA-870A-USB3 (Socket M2) 40 °C
Graphics
ASUS VH198 (1440x900@60Hz)
AMD Radeon HD 6800 Series (ATI AIB) 48 °C
Hard Drives
977GB Hitachi Hitachi HDS721010CLA332 ATA Device (SATA) 40 °C
Optical Drives
DTSOFT Virtual CdRom Device
ASUS DRW-24B1ST a ATA Device

Power supply
TypeATX12V 2.3 / EPS12V 2.91
Fans 1 x 140mm fan
PFCActive
ModularYes
Efficiency80 Plus Certified
Dimension (L x W x H)6.3" x 5.9" x 3.3"
Connectors1 x Main connector
1 x 12V (4+4pin)
7 x peripheral
7 x SATA
1 x Floppy
2 x PCI-E (8 to 6 pin)
2 x PCI-E(6Pin)


I just wanna know if the ram/gfx card will work for my system.
 
  • The ram should be fine. DDR3 @ 669MHz is the same as DDR3 1333 (PC3 10600) as far as I know. A quick note however, according to your motherboard specs, there are 4 total RAM slots. So make sure you put the 2nd stick into the corresponding channel slot. I am not positive how it works, but I believe they should be color coded, worse case, double check the user manual.
  • As for the graphics card, do you plan on running both via SLI or simply upgrading the current one? Also, you have it listed as an AMD Radeon 6800 series, what is the specific model you currently have installed?
- Rube​
 
If you're going to get RAM go for a dual channel kit, 2x2GB sticks instead of 1x4GB stick; 1333MHz @ 1.5v.

The video card will work, but do you already have a 6850?
 
Status
Not open for further replies.
Back
Top Bottom