What type of hard drive do I need!?

[speed_ga]

what type of hard drive do I need to get for this motherboard.

ECS P4M900T-M

STORAGE Support by VIA® VT8237A
4 x Ultra DMA133/100/66 devices
2 x Serial ATA devices
RAID0 & RAID1 configuration

here is a link to all the specs: ECS Web Site

Can I use the SATA 3.0Gb/s?

 

[peterhuang913]

You can use any hard drive: ATA, PATA, SATA, IDE, etc. As for the SATA harddrives: you can only get speeds up to SATA 1.5Gb/s. But you can use a SATA 3.0Gb/s harddrive, which you need to set to a lower speed setting.

 

[phucng_10]

Woah, you have the same exact motherboard as I do. Are you running an E6600?

You can either run SATA or IDE. Yes, you can use SATA 3.0GB/s if you remove the jumper on your SATA HDD.

 

[SamPNE]

Definitley get a SATA hard drive. I have 4 IDE devices in my PC, them **** cables take up so much room!!