RAM REGISTERED! - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > System Upgrades
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 08-28-2011, 07:19 AM   #1 (permalink)
Newb Techie
Join Date: Aug 2011
Posts: 3

Hi at all, this is my 1st post here, and i'd want to start with this.

I have to buy a REGISTERED RAM memory (133 Mhz) for my old motherboard Matsonic MS7117c.

This motherboard recognizes 256 MB of RAM but JUST if it's registered, on the contrary it'll recognizes just 128 MB.

The unique problem i can't find the right registered memory for my motherboard, i searched on Ebay, but the only one are belonging to for example just to IBM server etc.... and therefore never will fit in my motherboard.

I really need help guys.


techmat is offline  
Old 08-28-2011, 08:52 AM   #2 (permalink)
Lord Techie
Slaymate's Avatar
Join Date: Feb 2009
Location: Florida
Posts: 7,946

I don't see a Matsonic MS7117C listed but I have found a Matsonic MS7177CT.

Computer memory upgrades for Matsonic MS7177CT Motherboard from Crucial.com

Slaymate is offline  
Old 08-28-2011, 04:53 PM   #3 (permalink)
Newb Techie
Join Date: Aug 2011
Posts: 3

But i can't see that memory are Registered.

Not, my motherboard is this:


ere you are an example of registered memory (my motherboard supports a max of 256 MB for each slot) 133 on ebay:

ram registered 133 | eBayut i can't find a one compaytible with my matsonic.

I really need help guys
techmat is offline  
Old 08-28-2011, 05:07 PM   #4 (permalink)
Lord Techie
Join Date: Feb 2005
Location: asdf
Posts: 8,926

I can not find where the RAM MUST be Registered....

Three 168-pin SDRAM DIMM sockets
support PC100/133 up to 768MB

That is from the link you gave, any PC100/133 SDRAM stick should work fine.
c0rr0sive is offline  
Old 08-29-2011, 08:29 AM   #5 (permalink)
Newb Techie
Join Date: Aug 2011
Posts: 3

From motherboard's manual:

"The board has three DIMM slots for the installation of 168-pin, 3.3V
standard or registered SDRAM (Synchronous Dynamic Random Access
Memory) memory modules. The system supports memory that has builtin
error correction (EC), error correction code (ECC), or has no error
If you install the PPGA Celeron processor, you can install memory that
operates at 66 MHz (you can install PC-100 memory if you wish, but the
system will run the memory at 66 MHz).
You can install one, two or three modules. Each memory module can
hold a maximum capacity of 128 MB of standard SDRAM chips, or 256
MB of registered SDRAM chips so maximum memory capacity is 384
MB of standard SDRAM memory or 768 MB registered SDRAM memory.
I tested it, infact if i put 256 MB of Ram NOT registered, the system recognizes just 128 MB.
techmat is offline  
Old 08-29-2011, 08:33 AM   #6 (permalink)
Techie Beyond Description
MindoverMaster's Avatar
Join Date: Dec 2009
Location: /home
Posts: 12,212
Send a message via MSN to MindoverMaster

As it says. It can use a max of 128 per stick of unregistered SDRAM.

Neowin.net Steam Account
MindoverMaster is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
just registered. davids New Member Introductions 3 07-21-2006 12:04 PM
Just Registered zpc1027 New Member Introductions 8 06-19-2006 09:40 PM
Registered Rogerio Computer Networking and Internet Hardware 1 06-05-2006 03:36 PM
FX-53 and registered ram blackwrx Monitors, Printers and Peripherals 4 06-15-2004 01:32 PM
library not registered raidman75 Microsoft Windows and Software 1 05-14-2003 07:45 AM

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.