Please Help With An ASUS P4P800-E and an Raidmax Case
I am trying to build my computer but Ive run into a small problem
the diagram for the power stuff on the mobo doesnt match up with the lil black plugs I have to plug in. For example, I have the following...
THE MANUAL STATES:
System Panel Connector(20-Pin Panel)
This connector accommodates several system front panel functions.
then the diagram shows Power LED(PLED+/-), Speaker Connector(+5V, Ground, Ground, Speaker), IDE_LED(IDE_LED +/-), SMI Lead(ExtSMI#,Ground), ATX Power Switch(PWR, Ground), Reset SW(Reset, Ground)
-SYSTEM POWER LED LEAD(Green 3-1 Pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
-System Warning Speaker Lead(Orange 4-Pin SPKR)
This 4-Pin connector connects to the case mounted speakers and allows you to hear system beeps and warnings
-Reset Switch Lead(Blue 2-Pin RESET)
This 2-Pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.
-ATX Power Switch/Soft-Off Switch Lead(Yellow 2-Pin PWRBTN)
This connector connects a switch that controls the system power. Pressing the power switch turns the system between On & Sleep, Pressing ON & SOFT OFF, depending on the BIOS or OS Settings. Pressing the power switch while in the ON Mode for more then 4 Seconds turns the system OFF.
-System Management Interrupt Lead(Light Blue 2-Pin SMI)
This 2-Pin Connector allows you to manually place the system into a suspended mode, or "green" mode, where system activity is instantly decreased to save power and to expand the life of certain system components. Attach the case-mounted suspend switch to this 2-Pin Connector.
-Hard Disk Activity LED(Red 2-Pin IDE_LED)
This connector supplies power to the hard disk activity LED. Any read or write activity of an IDE Device cause this LED to Light UP.
THE SYSTEM PANEL CONNECTOR IS COLOR-CODED FOR EAST AND FOOLPROOF CONNECTION. TAKE NOTE OF THE SPECIFIC CONNECTOR COLORS AS DESCRIBED.
Now the only wires I find in the case, none of them have those labels on them.
I have the following wires:
Power Switch: Blue & White
Reset Switch: Blue & Black
Speaker: Red & Black(Twisted Together)
TPB+: Lt Green
TPA+: Lt Blue
So I am completely lost as to what goes where, The System Panel Color layout is as follows:
TOP ROW: Green(with like a + through it), 2 Green,2 Brownish, White, Orange(with like a + through it), & 3 More Orange.
BOTTOM ROW: Red(with like a + through it), Red, White, 2 Lt Blue, 2 Yellowish, White, 2 Blue.
Any help or input would be great, thanks for your time!