Network + Quiz #12 - Router Communication

OS Technologies Quiz #22: DOS Commands

  • Use the "no delete" command

    Votes: 0 0.0%
  • Use the "undelete" command

    Votes: 0 0.0%
  • Use the "format /file /undelete /n/y" command

    Votes: 0 0.0%
  • Use thrid party software to recover the file

    Votes: 0 0.0%
  • You are SOL because there is no way to recover the file once it has been deleted. You shouldn't have

    Votes: 0 0.0%

  • Total voters
    0
  • Poll closed .
Status
Not open for further replies.

mikesgroovin

HONK if you route packets
Messages
4,718
Location
MD
Network + Quiz #12

What is RIP?

Answer: C - Route Information Protocol

BONUS - What is it used for?
Answer: I believe Shroud's post below has explained it very well. Nice Info man!




***NOTE***
Please DO NOT post the answer in this thread as other users may wish to have the same opportunity to answer the question. The poll will be closed in 2 days and the answer may be discussed after the poll has been closed.

Any post containing any answer (correct or incorrect) or a hint toward the answer will be removed.


Thanks!

-Mike
 
RIP is an IGP, method of sharing shortest path info in a homogenous network. Or put another way, method of making sure IP datagrams get to the destination address and in as timely a manner as possible on the local network.
 
RIP is an instance of a Distance Vector routing protocol. It is typically used in smaller LAN configurations where the typical hop counts will not exceed 15. RIP has two versions, version 1 and version 2. Version 1 is truly limited as it is a truly classful routing protocol in that the subnet mask is not included in the routing update packets, Version 2 this functionality was added but it is still impossible for RIP to take advantage of any variable length subnet masks. The other major limitation is, as mentioned above, RIP measures hop counts (other routers) as its metric and the ttl(time to live) on any packet is a maximum of 15, if a destination network is more than 15 hops away the 15th router will drop the packet. RIP utilizes split-horizon to attempt to avoid routing loops. Split-horizon is a method in which a router will not advertise routes learned from a certain interface back out of that same interface.
 
Nice copy and paste. Did you actually know what you were talking about just then?
j/k...lol....sort of....

-Mike
 
Status
Not open for further replies.
Back
Top Bottom