Port Fwd- How to allow incoming on UDP port 1000

blackhole

Beta member
Messages
3
Location
United States
Hi Fellas,

Need some help. I have Netgear r6250 router but this question is rather general. To configure my OBI 202, setup requires the following 2 things:
#1 - Allow Outgoing: TCP Ports: 6800, 5222, 5223 AND UDP Ports: 5060, 5061, 10000 to 11000, 16600 to 16998, 19305
#2 - Allow Incoming on UDP Port: 10000

For #1 - I've forwarded those ports (both UDP and TCP ) on my Netgear R6250 router under port forwarding setup (pic attached) but I didnt specify outgoing, Im just assuming that is it. Is my setup right (see attchd pic)?

For #2, I dont know how to do which is "Allow Incoming on UDP Port: 10000" (can someone pls. suggest) thanks a lot,
 

Attachments

  • router 1.png
    router 1.png
    17.8 KB · Views: 6
Really all you'll likely need is one entry for port 10000 incoming for UDP. The outgoings will be allowed by default I'd think.
 
ok..let me try this. So you're saying that no rules are reqd. for outgoing - port forwarding is only used for incoming connections at ports- either thru UDP or TCP?
 
Back
Top Bottom