peterhuang913
Retired.
- Messages
- 8,076
- Location
- .
How do i go about setting up my belkin f5d-7230-4 as an ap to my linksys wrt54g?
Access Point
- Thread starter peterhuang913
- Start date
- Status
OP
OP
peterhuang913
Retired.
- Messages
- 8,076
- Location
- .
Guess no one can answer my super advanced computer question, as always.
Ethereal_Dragon
Fully Optimized
- Messages
- 3,755
- Location
- USA
Can you provide more info about how you are wanting to set this up?
If you are wanting to use this Belkin F5D7230-4 as an access point, you will want to log into the router's config page. From here, you will disable DHCP on this router, and make sure that the router is in the same subnet as the other router. (your Linksys is likely using IP address 192.168.1.1, with a 255.255.255.0 subnet mask, so give the Belkin a static IP address of 192.168.1.2 with a 255.255.255.0 subnet mask, and use 192.168.1.1 as the default gateway.). From here, all that is left to do is configure the wireless portion of the Belkin, and then connect the two routers together, LAN port to LAN port. Access Point is now setup.
If you are wanting to use this Belkin F5D7230-4 as an access point, you will want to log into the router's config page. From here, you will disable DHCP on this router, and make sure that the router is in the same subnet as the other router. (your Linksys is likely using IP address 192.168.1.1, with a 255.255.255.0 subnet mask, so give the Belkin a static IP address of 192.168.1.2 with a 255.255.255.0 subnet mask, and use 192.168.1.1 as the default gateway.). From here, all that is left to do is configure the wireless portion of the Belkin, and then connect the two routers together, LAN port to LAN port. Access Point is now setup.
OP
OP
peterhuang913
Retired.
- Messages
- 8,076
- Location
- .
I actually got it to work 5 minutes after my second post. You got most of it right, except for the last part. I did wireless to wireless, so both routers have 4 free lan ports.
Ethereal_Dragon
Fully Optimized
- Messages
- 3,755
- Location
- USA
No, mine was right..... Mine was for access point... if you were going wireless to wireless, that is bridged...
Glad you got it working though.
Glad you got it working though.
OP
OP
peterhuang913
Retired.
- Messages
- 8,076
- Location
- .
No, mine was right..... Mine was for access point... if you were going wireless to wireless, that is bridged...
Glad you got it working though.
Yea, I worded it wrong. Sorry. Anywho, it works!! and I don't even have certs like you.
- Status
Similar threads
