having trouble burning a disc - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Technology > Computer Audio and Multimedia
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 08-17-2005, 12:43 PM   #1 (permalink)
zen
Newb Techie
 
Join Date: Aug 2005
Posts: 2
Default having trouble burning a disc

hi all,ive got a targa home cinema system and its having a few probs,of which the latest firmware corrects(apparently).ive downloaded and unpacked the firmware and burnt it as an iso but it doesnt work,can any1 advise me on how to burn this properly,because it says you cant just burn it and im not sure on what the folder structure means.below is the readme file thats with the firmware:
nstructions for firmware update

1. Write the disc-image (Firmware_xx.iso) to a CD. Please take a look to the help of your burn software how to do this. Just writing the file to CD is not right!
2. The folder structure on the created disc shoud be /lg_dvd/firmware/upgrade/lg.
3. Put the CD into the homecinema-system.
4. The TV displays a message while reading the firmware.
5. The tray opens automatically.
6. Remove the CD from the drive.
7. Press the "Arrow Up" button on the remote control.
8. The tray of the device closes automatically and the update starts.
ATTENTION: DonĀ“t cancel the update progress!!
9. The device restarts automatically after approximately two minutes.
10. The backgound is displayed.
11. Now you have to do a factory reset:
12. Press the "Setup" Key on the remote control.
13. Select "Display" from the menu.
14. In the Menu "TV Aspect", select 16:9 as picture format and highlight it.
15. Enter the code " 1 3 9 7 1 3 9" and press "Enter"


any help appriciated ta very much
__________________

__________________
zen is offline  
Old 08-18-2005, 07:38 PM   #2 (permalink)
Junior Techie
 
Join Date: Jul 2005
Posts: 83
Default

The ISO file is a CDROM image. What the readme probably means, in regards to burning it properly, is that you do not want to simply burn the Firmware_xx.iso file to a CD. You want to restore the image of the Firmware_xx.iso file to a CD.

As far as how you do this, that all depends on the software you use for CDROM burning. If you are running Windows XP, you can get the ISO PowerToy and use it.

http://isorecorder.alexfeinman.com/isorecorder.htm
__________________

__________________
Jamil is offline  
Old 08-20-2005, 05:22 PM   #3 (permalink)
zen
Newb Techie
 
Join Date: Aug 2005
Posts: 2
Default

brilliant!!!!ta muchly for your help.worked a treat.
cheers m8
__________________
zen is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.