Peter.Cort
TF's First Dry Ice User!
- Messages
- 5,018
- Location
- Boston, MA
So for my senior project, as some of you know, I'm doing some tests on dry ice cooling. I've gotten everything done and just wanna throw up some stuff that I've done with it. Only problem is my dry ice supply went out of business and the other 2 companies that I was expecting to get from as a back up aren't open on the weekend. Also the board I'm using lacks a lot of overclocking headroom. It maxes around at 1.350v which is ridiculous and doesn't let me take the CPU above 2.94ghz.
Here's the setup:
CPU: AMD Brisbane 4000+ x2 (2.1ghz stock)
MOBO: Zotac 8200
RAM: OCZ HTC Reaper 800mhz 4-4-4-12 Stock
GPU: Onboard 8200
PSU: Antec Basiq 500w
Copper pot is custom fabricated out of 2 3/4" copper pipe, 1/8" thick, approximately 10" high. Fiberglass based insulation. Socket sealing is done with modeling clay. Pretty basic stuff. Will have a video up in a while.
Since I don't have any dry ice at the time of typing this, I just did a basic test of some acetone and some ice (water ice). I was able to achieve a 20*C drop on both cores.
Overclock:
Speed: 2.94ghz
Frequency: 280
Multiplier: 10.5
HTT: 600mhz
Voltage: 1.350v
NB Voltage: 1.22v
RAM Voltage: 2.1v
Here's the setup:
CPU: AMD Brisbane 4000+ x2 (2.1ghz stock)
MOBO: Zotac 8200
RAM: OCZ HTC Reaper 800mhz 4-4-4-12 Stock
GPU: Onboard 8200
PSU: Antec Basiq 500w
Copper pot is custom fabricated out of 2 3/4" copper pipe, 1/8" thick, approximately 10" high. Fiberglass based insulation. Socket sealing is done with modeling clay. Pretty basic stuff. Will have a video up in a while.
Since I don't have any dry ice at the time of typing this, I just did a basic test of some acetone and some ice (water ice). I was able to achieve a 20*C drop on both cores.
Overclock:
Speed: 2.94ghz
Frequency: 280
Multiplier: 10.5
HTT: 600mhz
Voltage: 1.350v
NB Voltage: 1.22v
RAM Voltage: 2.1v