Won't turn on after overclocking and running P95 Torture test

[skele89]

Its a brand new build with a core i7 and a P6T deluxe
Got a CoolerMaster Real Power Pro 1000w running the rig

It was clocked to 3.6 at 1.15 volts. I would assume this was under-volted, but i was working my way up...

Torture test with large FTT's had been running for about an hour. Went down the shops for about 45 minutes and when i got back computer was off, mobo lights off and wont respond to anything.

Have tried the CMOS jumpers and removing the mobo battery.

Haven't tested the PSU or anything else yet.

What would you recommend?

 

[Slaymate]

Unplug it from the wall outlet, remove the battery and wait a few hours.

 

[Antec-User]

Same thing happened to me a while ago, not the SAME, but my board ended up being dead...

Take your ram sticks out, remove the battery and push down on the little metal battery prong in the center for about 5 seconds. Re-install the battery and see if it posts.

If not that, let the board sit completely powered off for about an hour. -I've read of people having dead board symptoms, and it wakes back up after an hour.


Does you board have a speaker for beep codes? No beeps is either a bad MB or PSU.