Won't turn on after overclocking and running P95 Torture test - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Closed Thread
Thread Tools Display Modes
Old 07-15-2009, 01:04 AM   #1 (permalink)
Newb Techie
Join Date: Sep 2008
Posts: 38
Exclamation Won't turn on after overclocking and running P95 Torture test

Its a brand new build with a core i7 and a P6T deluxe
Got a CoolerMaster Real Power Pro 1000w running the rig

It was clocked to 3.6 at 1.15 volts. I would assume this was under-volted, but i was working my way up...

Torture test with large FTT's had been running for about an hour. Went down the shops for about 45 minutes and when i got back computer was off, mobo lights off and wont respond to anything.

Have tried the CMOS jumpers and removing the mobo battery.

Haven't tested the PSU or anything else yet.

What would you recommend?

skele89 is offline  
Old 07-15-2009, 07:03 AM   #2 (permalink)
Lord Techie
Slaymate's Avatar
Join Date: Feb 2009
Location: Florida
Posts: 7,946
Default Re: Won't turn on after overclocking and running P95 Torture test

Unplug it from the wall outlet, remove the battery and wait a few hours.

Slaymate is offline  
Old 07-15-2009, 09:51 AM   #3 (permalink)
Papa Chester
Antec-User's Avatar
Join Date: Sep 2008
Location: Afghanistan Campaign Veteran
Posts: 1,035
Send a message via MSN to Antec-User
Default Re: Won't turn on after overclocking and running P95 Torture test

Same thing happened to me a while ago, not the SAME, but my board ended up being dead...

Take your ram sticks out, remove the battery and push down on the little metal battery prong in the center for about 5 seconds. Re-install the battery and see if it posts.

If not that, let the board sit completely powered off for about an hour. -I've read of people having dead board symptoms, and it wakes back up after an hour.

Does you board have a speaker for beep codes? No beeps is either a bad MB or PSU.
PII 940 @ 3.8g | Gigabyte DS4H | OCZ Reaper 1066 | HD 4870 1G | Ultra X3 1000w | Antec 900 | 1/2" CPU/GPU LIQUID LOOP | OCZ SSD | Swiftech + XSPC

<---- If You enjoyed my ramblings, or if I've helped you, Check me... :D
Antec-User is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Intel i7 Overclocking Ulquiorra Schiffer Overclocking and Modding 37 06-06-2009 04:04 PM
Guide: Overclocking The i7 H4x3r Overclocking and Modding 17 05-13-2009 11:27 AM

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 07:15 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.