lol man thats a beeeotch. If you know where the pins are then starting from the top left corner, those should be the POWER pins, it should just be one connector that says POWER + and one POWER - NOTE: that this are NOT the connectors for the power switch which is a two-pin clip that should say like Power SW or something to that effect. Its hard to explain but if you were looking straight at it from above it should be:
Top left pin = P+ One pin to the right of that = P-
Below the top left pin should be HD Light positive to the right of that should be HD Light negative.
Right next to the P- on the top line of pins should be where the power switch goes and right next to the HD light is where the reset switch goes. Its REALLY hard to tell without knowing board, manufacturer, etc....but generally its around all in that order. If you look REAL hard around those pins they generally tell you which pin is positive which is negative and what pin needs to go there in tiny *** white text printed on the board.