Wire Sleeving/Covering - Page 3 - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 07-29-2009, 03:24 PM   #21 (permalink)
 
jfenwick's Avatar
 
Join Date: Jun 2007
Location: Toronto
Posts: 1,648
Send a message via ICQ to jfenwick Send a message via MSN to jfenwick
Default Re: Wire Sleeving/Covering

No worries, if you are having a hard time with the paper clip thing....if you don't have a belt sander or something to flatten and thin out the round ends it won't work....then try two staples, the 4, 6, 8 and 20/24 pins all have very similar little "wings" on each side that expand larger than the hole so if you use one staple on each side to push the "wing" back in and then pull the pin out the back...make sense? Hard to describe....staples are hard on the fingers though.
__________________

jfenwick is offline  
Old 08-04-2009, 11:50 PM   #22 (permalink)
 
Join Date: Feb 2009
Location: WI, USA
Posts: 1,556
Send a message via MSN to yzmxer608
Default Re: Wire Sleeving/Covering

I ended up using the staples, very tedious. I don't think you would be able to use them if you have bad eyesight, looking at something 1mm or less in length trying to see if it is turned to the side that is even shorter in length in a hole only a few mm's across is hard on the eyes . I ended up doing the PCI-E power cable, HD cable, and 4 pin power cable. Also did some ghetto rigging of 2 fans hehe (fan in back is blowing air out, fan in front is blowing air in).



__________________

__________________
yzmxer608 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Button Wire to Motherboard.. ? NayNay1991x Hardware Repairs and Troubleshooting 7 12-13-2008 07:08 PM
Wire issue. help would be great! Antimatter Hardware Repairs and Troubleshooting 16 09-28-2008 07:37 AM
crysis omg molsen Off Topic Discussion 77 06-17-2007 03:41 PM



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.