USCB 2.0 Connector set up???? - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 02-25-2005, 12:12 PM   #1 (permalink)
True Techie
 
Join Date: Feb 2005
Posts: 178
Default USCB 2.0 Connector set up????

ok...i don't know where all the plugs go for the USB 0.2 Connector on the motherboard. in the manual its set out like this:

USB_POWER | P-5 | P+5 | GND | DUMMY
USB_POWER | P-4 | P+4 | GND |

but the leads are labelled +5V, -DATA, + DATA, GND and there's two fo these cables

Where do they all go?

For USB_POWER i've used a 2 pin connector labelled POWER SW, is this correct?
__________________

__________________
AMD Sempron 2500+
ASRock K7S41GX Motherboard
1gb DDR Ram (PC2700)
80gb SGB Hard Drive(OS)
40gb Maxtor Hard Drive
PNY GeForce 6600GT AGP 128MB
5.1 Creative Surround Sound System
SamBarry is offline  
Old 02-25-2005, 02:32 PM   #2 (permalink)
Monster Techie
 
Join Date: Apr 2004
Posts: 1,574
Default

I had trouble with this as well. You need to connect +5V to USB power, and GND to GND, and the -DATA and +DATA to the P-5 and P+5, and leave the dummy pin. At least this is what I think. You must be very careful to plug it in the right way round so maybe someone else can confirm this.
__________________


\'There is only one basic human right, and that is to do as you **** well please.
And with it comes the only basic human duty, to take the consequences.\'



m3trj is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 09:39 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.