Trying to push my OC further, plz help!!! - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 08-04-2010, 02:43 AM   #1 (permalink)
Junior Techie
 
Join Date: Feb 2009
Posts: 48
Default Trying to push my OC further, plz help!!!

Hello, I dont know THAT much about overclocking, but I like to think of myself as computer literate. Everything ive done is based off what i've read or tried in my free time. Right now it appears to be pretty stable, I play a lot of fairly demanding video games for long periods of time and it hasn't crashed on me yet. So far its Prime95 stable but havn't ran it longer than 2 hours but, I game up to 3-4+hrs a sitting. Here's some stuff you should know,

PC Specs,
CPU: Intel Core 2 Quad 9550 @ 3.75Ghz (E0 stepping)
Heatsink: Corsair H50 CPU Cooler
Mobo: Biostar TP45HP
Ram: 2x2gb G.Skill Pi Black DDR2 900 MHz
GPU: XFX Radeon 5850 @ 1000/1200 MHz
HDD: 1TB WD Caviar Green
OS: Windows 7 Pro 64-Bit
(Customized the case a little bit for better air flow and ive got 5x120mm 2400rpm fans, and flawless cable management.)

Windows experience index,
CPU: 7.5
RAM: 7.5
Graphics: 7.8
Gaming Graphics: 7.8
Primary HD: 5.9

ambient room temp: 77f
system temp: 28C-33C

Idle
Core 0: 39C
Core 1: 38C
Core 2: 39C
Core 3: 39C

Load
Core 0:55C
Core 1:52C
Core 2:56C
Core 3:58C

Here's some Bios info,

CPU Config,
C1E Support: disabled
CPU TM Function: disabled
Intel(R) C-STATE tech: disabled

O.N.E.
Ration CMOS Settings: x8.5
CPU frequency: 440
OC Retry Count: 1
FSB(Bsel) to Northbridge latch: fsb 1333
DRAM Frequency: DDR2 880Mhz
DDR2 Enhance Mode: disabled

DRAM Config,
DDR2 RCOMP Configuration : configuration 4
Static tREAD Value(PL): 16t
Configure DRAM Timing by SPD: disabled
Timings: 4-4-4-12

Clock Gen config,
pcie frequency: 101
CPU clock Skew Control: 200ps
(G) MCH Clock Skew Control: auto
CPU Clock Driving Control: auto

Voltage Configuration,
CPU: +0.0750v
DDR: +0.300v
Chipset: +0.325v
FSB: +0.350v
CPU Core1 GTL Ref voltage: 0.63*vtt
CPU Core2 GTL Ref voltage: 0.63*vtt
MCH GTL Ref voltage: 0.61*vtt
CPU PLL freq: 1.7v
ISL6322 freq: nominal

CPU: 1.296v
NB/SB: 1.384v
DDR2: 2.142v
FSB: 1.432v

I want to push it up to 4.0Ghz, I'm fairly confident in my hardware aside from my RAM. I just don't really know what to do next, I've tried bumping up the CPU and RAM freq but I can't get it stable. There are some Bios settings I am unfamiliar with so I'm sure it has something to do with that. If you have any knowledge or recommendations for improvement I could really use/appreciate the help.
Wizdumb is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
i got a virus plz help kishennayee Viruses, Spyware and Malware 4 05-22-2010 10:40 PM
PLZ Help. Not complicated. Really appreciate it. Plz kebbya New Systems | Building and Buying 3 10-10-2009 12:24 PM
OMG PLZ HELP!!! New Install Issues! bentobaku Hardware Repairs and Troubleshooting 15 08-28-2009 07:17 PM
recommend me a hard drive plz :) siddanth3 New Systems | Building and Buying 11 10-16-2008 08:03 AM
router to router setup help plz!! hitm4n666 Computer Networking and Internet Hardware 3 10-25-2007 03:01 PM



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 09:04 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.