System Temperatures!

[Bevan]

Winbond W83627EHF hardware monitor

Voltage sensor 0 1.32 Volts [0xA5] (CPU VCORE)
Voltage sensor 1 0.98 Volts [0x7A] (VIN0)
Voltage sensor 2 3.33 Volts [0xD0] (AVCC)
Voltage sensor 3 3.33 Volts [0xD0] (+3.3V)
Voltage sensor 4 1.69 Volts [0xD3] (VIN1)
Voltage sensor 5 1.70 Volts [0xD4] (VIN2)
Voltage sensor 6 1.86 Volts [0xE8] (VIN3)
Voltage sensor 7 1.59 Volts [0xC7] (VIN4)
Temperature sensor 0 32°C (89°F) [0x20] (SYSTIN)
Temperature sensor 1 60°C (139°F) [0x77] (CPUTIN)
Temperature sensor 2 58°C (136°F) [0x74] (AUXTIN)
Fan sensor 1 2058 RPM [0x29] (CPUFANIN0)

AMD Phenom X4 9950 Black Edition hardware monitor (@2.9 from 2.6)

Temperature sensor 0 57°C (134°F) [0x1C8] (Core #0)
Temperature sensor 1 57°C (134°F) [0x1C8] (Core #1)
Temperature sensor 2 57°C (134°F) [0x1C8] (Core #2)
Temperature sensor 3 57°C (134°F) [0x1C8] (Core #3)

GeForce GTS 250 hardware monitor

Temperature sensor 0 43°C (109°F) [0x2B] (GPU Core)

ST3360320AS hardware monitor

Temperature sensor 0 35°C (94°F) [0x23] (HDD)

MB Temp 33°C

CPU: Xigmatek Dark Knight CPU Cooler
GPU: Stock cooler (no pci slot fans only side panel fan)
Case: NZXT Apollo Mid tower (Rear, front and side fan, Cable management BAD!, no space in case at all) (Dark knight CPU cooler is 1mm away from touching my side panel, so air flow isnt greath tbh)
Can anyone reccomend me a good full tower case with excellent cooling? Budget £50 ish

is there anything un usual about these temps? If so what can I do to lower them(apart from cable management) such as lowering voltages and stuff?

Thanks in advance

 

[thirdshiftdj]

Try reseating the HSF and make sure you don't put too much TIM on it.

 

[Bevan]

Try reseating the HSF and make sure you don't put too much TIM on it.

Try re seating heatsink fan and make sure you dont put to much TIM on it? :S

Im only 15, sorry xD does TIM mean thermal paste or something? :S

 

[Hefemeister]

Yes thermal paste AKA thermal interface material.
Thermal interface material - Wikipedia, the free encyclopedia

 

[Muffin Man]

heres two you might like.
Xclio Windtunnel Extreme V2 Cooling Black Tower case with 2 x 25cm VR Side Fans - w/o PSU - Scan.co.uk

A380Plus Silver - Xclio A380Plus Tower Silver + Window & 25cm Front & 36cm Side Super Cooling Fans Screwless w/o PSU - Scan.co.uk

 

[Bevan]

I removed alot of my thermal paste so it was almost a transparent layer, and now im getting higher temps than before, im getting 60C idle but my room is VERY hot, system temperature is 38C. Im getting a Antec 300 Three Hundred Black Case - No PSU - Ebuyer

Does anyone have any knowledge on this case? From the reviews online its a very good case.
All I want to know is if i'd be better off spending £50 on a full tower lower quality case or spending it on a rather high quality mid tower.

Thanks

 

[Hefemeister]

The 300 is a great case. I have one of my machines in it.

 

[Slaymate]

I removed alot of my thermal paste so it was almost a transparent layer, and now im getting higher temps than before

You've removed to much paste. Make sure that you have paste in the seams between the base of the heatsink and the exposed heatpipes.

 

[Bevan]

Thanks Slaymate, im now getting 38-43 on idle temps and not much higher when gaming !

Thanks

 

[Slaymate]

Your Welcome