sleeving a psu? - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 07-06-2004, 09:56 PM   #1 (permalink)
Ultra Techie
 
Join Date: Apr 2004
Posts: 527
Default sleeving a psu?

any one got any good guides on it? I have all the sleeving, heat shrink and uv ends. But i dont know if the only way was to take the pins off the wires? Because i dont know if theirs enough wires to really spend that much time.
__________________

__________________
P4 2.26 ghz, Intel d850emv2 mobo, 768mb of pc800, sony 4x dvd-rw, teac burner, nvidia ti4600 graphics, enermax 330watt ps
4 silent uv fans, cold cathodes in full tower antec case, round ide cables

SOny vaio 2.66 ht ghz modded into raidmax case with green cold cathodes.
P4 2.8ghz HT, 512mb ddr, Intel KD865gbfl, onboard video, raidmax case, blue cathodes, round ide, loomed wires, 4x dvd burner, wd sata 80gb hard drive
Intel d865perl, 2.8ghz northwood, antec sonata, wd caviar 20gb, Corsair 512mbx1 for now. 380watt psu, ati 9600, dvdrom cdrw floppy in black too match case
mrzeeedler is offline  
Old 07-06-2004, 10:01 PM   #2 (permalink)
Ultra Techie
 
Join Date: Mar 2004
Posts: 767
Send a message via AIM to Monster00
Default

well... there are some ways to do it. You can go to frozencpu.com and get a 4 pin molex pin remover and remove them like that. Or.. you can get a paper clip and take the end of it, and stick it in the outside of the pins and there are liek 2 little clips on the molex connector. What this is bacisalyl doing, is bending the clips In so the wire will slide right out. Ive dont it to a few wires on my computer and it worked out well. But the eaisest way i think is to get the 4 pin molex remover from frozencpu.com and do it like that. here they are actully... female and a male tool

http://www.frozencpu.com/cgi-bin/frozencpu/slt-02.html
http://www.frozencpu.com/cgi-bin/frozencpu/slt-03.html
__________________

__________________
Intel 2.8GHZ 800mhz FSB
Western digital 120 GB HD
Western digital 40 GB HD
Asus P4p800s motherboard
1280MB of ram
Xaser III Red and Blue case
Antec 550 watt PSU
BACK TO GOOD OLE CPU FANS(serious not kidding)
ATI readon 9800xt 256 MB
8x DVD burner
52X cd burner
Monster00 is offline  
Old 07-06-2004, 11:13 PM   #3 (permalink)
Ultra Techie
 
Join Date: Apr 2004
Posts: 527
Default

Well no i have that but the wires are like looped together. So the Like from the molex its connected the next molex. THe only way to sleeve them is too take the pins off the wires and sleeve the individual set of wires at once otherwise ur sleeving sets together. I mean i can do like fans and some other things no problems it just these things.
__________________
P4 2.26 ghz, Intel d850emv2 mobo, 768mb of pc800, sony 4x dvd-rw, teac burner, nvidia ti4600 graphics, enermax 330watt ps
4 silent uv fans, cold cathodes in full tower antec case, round ide cables

SOny vaio 2.66 ht ghz modded into raidmax case with green cold cathodes.
P4 2.8ghz HT, 512mb ddr, Intel KD865gbfl, onboard video, raidmax case, blue cathodes, round ide, loomed wires, 4x dvd burner, wd sata 80gb hard drive
Intel d865perl, 2.8ghz northwood, antec sonata, wd caviar 20gb, Corsair 512mbx1 for now. 380watt psu, ati 9600, dvdrom cdrw floppy in black too match case
mrzeeedler is offline  
Old 07-06-2004, 11:20 PM   #4 (permalink)
Ultra Techie
 
Join Date: Mar 2004
Posts: 767
Send a message via AIM to Monster00
Default

so u mean u have a Y cable?? You would just need to use 2 sleeves i guess..
__________________
Intel 2.8GHZ 800mhz FSB
Western digital 120 GB HD
Western digital 40 GB HD
Asus P4p800s motherboard
1280MB of ram
Xaser III Red and Blue case
Antec 550 watt PSU
BACK TO GOOD OLE CPU FANS(serious not kidding)
ATI readon 9800xt 256 MB
8x DVD burner
52X cd burner
Monster00 is offline  
Old 07-07-2004, 02:50 AM   #5 (permalink)
Ultra Techie
 
Join Date: Apr 2004
Posts: 527
Default

Just nvm.....
__________________
P4 2.26 ghz, Intel d850emv2 mobo, 768mb of pc800, sony 4x dvd-rw, teac burner, nvidia ti4600 graphics, enermax 330watt ps
4 silent uv fans, cold cathodes in full tower antec case, round ide cables

SOny vaio 2.66 ht ghz modded into raidmax case with green cold cathodes.
P4 2.8ghz HT, 512mb ddr, Intel KD865gbfl, onboard video, raidmax case, blue cathodes, round ide, loomed wires, 4x dvd burner, wd sata 80gb hard drive
Intel d865perl, 2.8ghz northwood, antec sonata, wd caviar 20gb, Corsair 512mbx1 for now. 380watt psu, ati 9600, dvdrom cdrw floppy in black too match case
mrzeeedler is offline  
Old 07-07-2004, 03:10 AM   #6 (permalink)
Ultra Techie
 
Join Date: Mar 2004
Posts: 767
Send a message via AIM to Monster00
Default

hey hey calm down... i know what u mean. When i did mine i had to take both of the conenctors off and use 2 sleeves. Then put them back on.
__________________
Intel 2.8GHZ 800mhz FSB
Western digital 120 GB HD
Western digital 40 GB HD
Asus P4p800s motherboard
1280MB of ram
Xaser III Red and Blue case
Antec 550 watt PSU
BACK TO GOOD OLE CPU FANS(serious not kidding)
ATI readon 9800xt 256 MB
8x DVD burner
52X cd burner
Monster00 is offline  
Old 07-07-2004, 03:23 AM   #7 (permalink)
Ultra Techie
 
Join Date: Apr 2004
Posts: 527
Default

no i am calm i just dont care. I think i may have a way to do it. Take all the connectors off then try to slide the first piece on from the very end to the first wire. Sliding it over the pins i guess. i dont know im not in any rush to do anything, since you cant see them anyway lol.
__________________
P4 2.26 ghz, Intel d850emv2 mobo, 768mb of pc800, sony 4x dvd-rw, teac burner, nvidia ti4600 graphics, enermax 330watt ps
4 silent uv fans, cold cathodes in full tower antec case, round ide cables

SOny vaio 2.66 ht ghz modded into raidmax case with green cold cathodes.
P4 2.8ghz HT, 512mb ddr, Intel KD865gbfl, onboard video, raidmax case, blue cathodes, round ide, loomed wires, 4x dvd burner, wd sata 80gb hard drive
Intel d865perl, 2.8ghz northwood, antec sonata, wd caviar 20gb, Corsair 512mbx1 for now. 380watt psu, ati 9600, dvdrom cdrw floppy in black too match case
mrzeeedler is offline  
Old 07-07-2004, 03:26 AM   #8 (permalink)
Ultra Techie
 
Join Date: Mar 2004
Posts: 767
Send a message via AIM to Monster00
Default

lol.. i sleeved like 2 of mine. It took a very long time. I hated it so i just organized my wires using zip ties and now its very good. But whatever floats your boat.
__________________

__________________
Intel 2.8GHZ 800mhz FSB
Western digital 120 GB HD
Western digital 40 GB HD
Asus P4p800s motherboard
1280MB of ram
Xaser III Red and Blue case
Antec 550 watt PSU
BACK TO GOOD OLE CPU FANS(serious not kidding)
ATI readon 9800xt 256 MB
8x DVD burner
52X cd burner
Monster00 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.