stainer711
In Runtime
- Messages
- 429
I've currently got my e7200 running at 3.6ghz with a 1.325vcore with 56C load temp (speedfan) or 50C load temp (realtemp) at a 75F ambient temperature. If I set the fsb to where I get 3.8ghz I will be able to run a ram:fsb ratio at 1:1 instead of 5:6, but my temps will likely go up and I will have to probably increase the vcore to somewhere around 1.365. My current ram is OCZ DDR 2 800 which is currently running at 920mhz at 4-4-4-12 timings. If I were to run a 1:1 FSB:RAM ratio my ram would probably be running at 810 mhz. Would all these settings be alright for 24/7 use? Having my processor running at 3.8ghz would be pretty awesome. I would probably be at 1.365vcore and 60C load according to speefan, but this is just an estimate.
Update: I tried running the processor at 3.83ghz with a 1.3625 vcore and received errors in prime95. I think i'm just going to stick to 3.6ghz. I don't want to put too much strain on the processor.
Update: I tried running the processor at 3.83ghz with a 1.3625 vcore and received errors in prime95. I think i'm just going to stick to 3.6ghz. I don't want to put too much strain on the processor.