Rate the Wire Management Above You!

good idea but prob is that fan goes through a fan controller and the wires arnt quite long enough :(
 

definatly if you can and dont mind drill some holes about 1 1/2 an inch away from the screwholes your using now on your drive bays and get some right angle Sata Cables and try to bend your sata power cable to try and sweeze it in and if you cant get it to fit then try to put it in verticly and cut holes where the screw holes are on the HDD and have the cables tucked around the Drive bays in the back


if that makes any sense
 
yea... the PSU doesnt really go with the case. lol.


the AC64 cant go the other way on the DFI NF4 board. my ram are in the orange slot so i cant turn the AC64
 
heres my case it... the wire management isnt great - i only made an effort today to try and tidy it up a bit and it looks quite cool inthe dark ;
Caseinlight.jpg
 
Not bad. Kinda hard to judge and give advice, when the pic is a bit small. But from the looks of it, 7/10.
 
Back
Top Bottom