Ram Won't Boot @ 1066...

[Baez]

You didn't answer my question.

 

[Millenniumtiger]

I haven't had a chance to look at those.....they were just at the defaults though like the 5-5-5-15...the only one that wasn't 5 was the one that was at 15 and there was one other at 36

 

[BongWizard]

if you're trying to run the tRFC at 36, that could be the issue... you'll wanna loosen that out to around 40... also, make sure the tRD isnt too tight either... you should be able to run those with a tRD around 7 tho

 

[Nagasama]

Well, I really don't feel like RMA'ing them lol.

thats dumb. no offense. you aren't getting what you paid for. RMA THEM.

 

[Millenniumtiger]

Ok...So here are all the settings besides the basic 5-5-5-15

tWR=5
tRFC=40 (was 36)
tWTR=3
tRRD=3
tRTP=4

So I just changed the tRFC from 36 to 40...trying to boot now with 2.3v

 

[Baez]

tWR can go to 6 too. And what about your Command Rate?

 

[BongWizard]

tWTR might wanna come out to 4, but tRTP should be able to sit on 3 pretty comfortably... also, whats your tRD (aka Static tRead or Performance Level)??