Ram Voltages?

[Indobos]

Where do I find out my Ram voltages. I have my system @ 3.2 right now. But when I try to increase the FSB I get the blue screen of death. I associate this with my ram having an issue. I don't think it is my CPU voltage due to the fact that I can run it from its current voltage setting of 1.38 to 1.5 with no luck. Any suggestions? I also have my ram at a 1to1 ratio.

 

[veedubfreak]

Download cpu-z. That will give you the info on all of your system components. A good rule of thumb is to set the fsb .+1, the memory .2+ and pci-e +.1 as far as voltages go. Thats going to be a nice safe boost that should get you stable.

 

[b1gapl]

I'm assuming his memory, are the G. Skill HZs. The stock voltage is 2.0-2.1v. So set the DDR2 OverVoltage to +0.3v, because the standard on the DS3R, sets any DDR2 memory stick to 1.8v.

 

[Indobos]

Yes they are B1gapl. Thanks for that. Will that help me to increase the FSB without getting the Blue screen of death?

 

[b1gapl]

It will help stabilize the overclock, so you can go further.