Qx9770 45nm VS QX6850 65nm
- Thread starter StealthTools
- Start date
- Status
zmatt
The Bulldog
- Messages
- 4,660
- Location
- In an empty Ramen packet
Which sticks actually use those?
Puddle Jumper
Mod Emeritus
- Messages
- 4,292
^^ I'm pretty sure the OCZ Golds DDR2 1100 have them.
Newegg.com - OCZ Gold 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory - Desktop Memory
Newegg.com - OCZ Gold 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory - Desktop Memory
OP
OP
StealthTools
Hardware/VB.net/Anti-vir
- Messages
- 515
Newegg.com - OCZ Gold 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory - Desktop Memory
Timings could be tightened on those quite a bit.. they are only around 55$.. they really going to hold up to this project?
1100 / 2 = 550FSB rated memory... let me calculate this..
Yep.. those will do the job, as long as they are good quality.
Timings could be tightened on those quite a bit.. they are only around 55$.. they really going to hold up to this project?
1100 / 2 = 550FSB rated memory... let me calculate this..
Yep.. those will do the job, as long as they are good quality.
zmatt
The Bulldog
- Messages
- 4,660
- Location
- In an empty Ramen packet
I use them in my rig. OC'ed up to 3.8ghz without having to change any settings on them. That's about as high as I dare on stock cooling though.
The timings aren't great, but they aren't bad either. When you consider the speed these sticks run at, it makes sense. Crucial Ballistix have 4-4-4-12 timings, but they also run at DDR2 800 speeds.
The timings aren't great, but they aren't bad either. When you consider the speed these sticks run at, it makes sense. Crucial Ballistix have 4-4-4-12 timings, but they also run at DDR2 800 speeds.
OP
OP
StealthTools
Hardware/VB.net/Anti-vir
- Messages
- 515
Sounds good..
Looks like I upgraded 2 major parts today.
I'll be writing letters now
Thanks a TON peeps!
Without this forum.. I'd be lost.
Looks like I upgraded 2 major parts today.
I'll be writing letters now
Thanks a TON peeps!
Without this forum.. I'd be lost.
thirdshiftdj
I feel funny...
- Messages
- 3,808
- Location
- Lowell,Ma
Welcome to Transcend Website - Transcend's aXeRamâ„¢ 1066+ Receives Great Review at VR-Zone
You will have a better chance of hitting 1200mhz w/ these. Odds are you will more than you won't
transcend axeram 1066 - Google Product Search
You will have a better chance of hitting 1200mhz w/ these. Odds are you will more than you won't
transcend axeram 1066 - Google Product Search
OP
OP
StealthTools
Hardware/VB.net/Anti-vir
- Messages
- 515
Still open for suggestions as I write the main letter to input the parts in.
zmatt
The Bulldog
- Messages
- 4,660
- Location
- In an empty Ramen packet
exactly what record are you trying to break? OC? Super pi? 3dmark?
Depending on what you are trying to do there are many different things that can be done. Also is this supposed to run 24/7 in this state or is it a one time suicide run for glory?
Depending on what you are trying to do there are many different things that can be done. Also is this supposed to run 24/7 in this state or is it a one time suicide run for glory?
OP
OP
StealthTools
Hardware/VB.net/Anti-vir
- Messages
- 515
I had a goal of getting to 5GHz with the best parts I could get.. with water..
Because of the 45nm chip I am not going to go over 1.45V so.. Who knows how far that will take me.
I am just trying to get as far as I can get to a maximum of 5GHz.
I want to get it as stable as possible at or over 4.5GHz if I can.
Can I get a recommendation on the wattage of the PSU I would need?
I currently have a 750W...
Because of the 45nm chip I am not going to go over 1.45V so.. Who knows how far that will take me.
I am just trying to get as far as I can get to a maximum of 5GHz.
I want to get it as stable as possible at or over 4.5GHz if I can.
Can I get a recommendation on the wattage of the PSU I would need?
I currently have a 750W...
- Status
Similar threads
