prelude beast
Baseband Member
- Messages
- 60
On sensorview pro i notic my cpu temp change real fast and random like it not accurate it be at 40 than go 27 than 3 and keep going why is it doing doing this but my sys temp is steady.
here is what my sensorview pro screen show.
and also notic in setting and when go cpu i can pick reading from 3 sensor
Ok on speedfan it have two temp 1 why dont sensorview dont or everest and also temp 1,2 ,3 which one is cpu ,sys or aux reading. here is what speedfan read
ImageShack - Hosting :: rrghwm0.png
And on everest it do the same thing sensorview pro cpu temp move around .
here everest reading
Field Value
Sensor Properties
Sensor Type ITE IT8705F (ISA 290h)
Temperatures
Motherboard 10 °C (50 °F)
CPU 14 °C (57 °F)
Aux 39 °C (102 °F)
WDC WD800JB-00JJA0 36 °C (97 °F)
Cooling Fans
CPU 2679 RPM
Voltage Values
CPU Core 1.52 V
+2.5 V 1.57 V
+3.3 V 3.20 V
+5 V 5.05 V
+12 V 10.37 V
+5 V Standby 4.70 V
VBAT Battery 3.20 V
Also just had biostar p4m80-m4 put in if it matter.
here is what my sensorview pro screen show.
and also notic in setting and when go cpu i can pick reading from 3 sensor
Ok on speedfan it have two temp 1 why dont sensorview dont or everest and also temp 1,2 ,3 which one is cpu ,sys or aux reading. here is what speedfan read
ImageShack - Hosting :: rrghwm0.png
And on everest it do the same thing sensorview pro cpu temp move around .
here everest reading
Field Value
Sensor Properties
Sensor Type ITE IT8705F (ISA 290h)
Temperatures
Motherboard 10 °C (50 °F)
CPU 14 °C (57 °F)
Aux 39 °C (102 °F)
WDC WD800JB-00JJA0 36 °C (97 °F)
Cooling Fans
CPU 2679 RPM
Voltage Values
CPU Core 1.52 V
+2.5 V 1.57 V
+3.3 V 3.20 V
+5 V 5.05 V
+12 V 10.37 V
+5 V Standby 4.70 V
VBAT Battery 3.20 V
Also just had biostar p4m80-m4 put in if it matter.