Originally Posted by Antec-User
But could someone please explain to me how to run a single rad with a CPU and a GPU block? I just don't see a point to run hot coolant from the CPU to the GPU block.
And as far as the paste, I just do a very light smear across the cpu... Just enough to cover the silver-ish look. just until it's evenly distributed..
Because the coolant is running through the loop fairly fast, temps from any one point of the loop to another vary by no more than a few degrees at most.
For your thermal paste, like I said, grab some MX/TX -2 it's the same stuff so either will work, and put the paste right in the middle of the chip, then let the pressure of the waterblock spread it out.