Thanks for following and commenting guys!
Unfortunately Cooler Master doesn't offer a window option for the 922, but this doesn't phase me. I chose to install a transparent red window based on the feedback I received from the CM Storm
I modified. Just so you're aware, the Red acrylic is dark and I have not installed a window in the 932 HAF yet.
Here are the steps involved for the 922
Materials & Supplies:
3M Scotch 4010 Mounting Tape Case Mod Tape of the Gods
U-channel edge molding for PC Mod Window
Clear & Colored Computer Case Windows
Ruler, Pen, Painters or Masking Tape (I prefer 3M Scotch 233+ Green Tape) , Rotary Tool, Jigsaw with 18 TPI or higher metal cutting blade, Hand File. Not pictured is Safety Glasses, Empty Box and X-acto Knife (or Razer blade)
The HAF 922 side panel is similar to the CM Storm Scout.
Perforated portion of the stock panel will hold 1x 200mm cooling fan or 2x 120mm.
Start off by masking off the raised portion of the left side access panel with masking tape. I prefer to use 3M Scotch 233+ Green Tape. It leaves no sticky residue.
Window location with space measurements.
Use any roll of tape to make rounded corner. Round corners allow you to use the U-channel edge molding for PC Mod Window
U-channel window molding.