Over Clocking 2700+ (333mhz)

[jay]

ok i can oc it to just 2.3ghz then it freeze's do i have to up the voltage with this? and ram?

The voltage is allready at 1.676

 

[jay]

And how far can i up all this till it's damage point?

 

[DJ-CHRIS]

The dammage point will be heat, not voltage (even though heat and voltage go hand in hand)

I would try raising the voltage, I got my 1.5volt CPU running at 1.75 with no problems

 

[Nubius]

Well being that in your other thread you were saying your temp was hitting 60C I don't think it's at all a good idea to overclock.

If you aren't overclocking the RAM then all you need to raise is the vcore. If your RAM IS being overclocked then you need to loosen your timings and add more voltage to the dimm.

 

[jay]

mmmmmmm but i rasie this all right but i dont see a diff in the CPU temp it just sits a 56 C to 60C never moves even when pumped the volatge up!, so im like (WTF) at the moment !

 

[jay]

Also could it be maybe the cpu is hitting the sensor? or very close to it displaying the wrong temp, that possible?

 

[jay]

i fixed my Temp Probelm now how far can i overclock this heep of crap!

AMD athlon Xp 2700+
512MB DDR333 Kingston
Western Digital 80gig SATA
ATI Radeon 9250 128Mb
GA-7VT600 1394 (VIA KT600 chipset)

 

[jay]

My m/b has its own overclocking utility or can do it from bios

 

[jay]

overclock

i finally got my athlon xp 2700 stable

 

[jay]

And temps