ok i suck

[joowan]

am i stuck here?

currently

if i push the FSB to 1315, windows might start but freezes up.

right now its running everything fine and dandy.

this is my ram

http://www.newegg.com/Product/Product.asp?Item=N82E16820145015

is the ram holding my professor back?

 

[King X13]

you can either try to loosen your memory timings, or try setting it at a 1:1 ratio. every overclock is going to be different so keep that in mind.

 

[flyboychuckles]

Yeah loosen the timings a bit (probably 5-5-5-18) until you get a stable overclock, then adjust the memory. You may need to up the juice to the memory to keep the tighter timings with a higher FSB.

 

[reggie_da_man]

That's definetly your ram.

 

[Nagasama]

you should run your memory in dual channel as well.

 

[joowan]

i dont remember finding anything in bios where i can change the ram ratio to 1:1. what is it called?

and how do i run my ram in dual channel?

 

[RalliArt882]

Don't put the two RAM sticks right next to each other. Place them in the color coded slots of the same color. So, put them in #1 and #3 which are the same color, or you can put them in #2 and #4 which are the same color.

 

[joowan]

gotcha.


my ram timing's currently at 5-5-5-13 @1.9v

i'll put it to 5-5-5-18 when i go home after work (what is bank cycle?)

about howmuch more voltage should i give? (if any)

 

[NosBoost300]

your memory is only running ddr700.. you should have plenty of room to keep oc'n

 

[Lonewolf5460]

cant you lower your multiplier to 8 and see if your ram has any more headroom left acording to cpu z you have it a 9