OC'ing q660 on IP35 pro - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 12-14-2007, 11:13 AM   #1 (permalink)
Newb Techie
Join Date: Dec 2007
Posts: 28
Default OC'ing q660 on IP35 pro

Hey guys, I just made my first rig, and I'm OC'ing it atm. I Just wanted to post what I've done so far to see if i'm doing it right..

Here's my specs -
q6600 @ 3.6ghz ATM. 400 FSB x9 I gusse that's what it's called?
(g0 revision, Stepping B. Read from CPU-Z.) running at 1.4 CPU volt or w/e

Cooling it with a Tuniq tower., About 35-40 when not dong anything, and when using prime it's about 57C. Using Core temp to tell me this. Ran prime95 for about 5 hours and no error
Anything else I should run to make sure my thing is going well? I'm running COD4 VERY good snice the OC, and I haven't got a BSOD lol

Ram 2 gig of Crucial Ballistic Mem timing 4-4-4-12 . mem volt 2.1. Set to 800 1.1

8800 GTS 512 (G92), How do I OC my video card? I've been trying to find something to do it, or figure out how. I tired to use ATITOOL or something and it just woudn't work so I gave up.

Mobo - Abit IP35 pro.

PSU - Corsair 620 HX.

Case - Cooler master Stacker 830

Most all other settings are stock in the BOIS other than the stuff listed.
I got a 14000 score on 3d06 with the free test at like 1200 / 1000 res or whatever it comes with. ( don't know if that's good or bad. lol )

Thanks again.

Magooly is offline  
Old 12-14-2007, 11:28 AM   #2 (permalink)
Do not Stare at my Avatar
Ste's Avatar
Join Date: Aug 2005
Location: Upon Gleaning Infinity
Posts: 9,578
Send a message via MSN to Ste
Default Re: OC'ing q660 on IP35 pro

We do not care about software voltage read outs.
What is the Vcore you MANUALLY set through the CMOS?
Nice, Same clock as mine
CPU-Z Validator Database
The Vcore I set in CMOS is 1.425

To overclock video cards you can use several programs.
Most common are ATI tool and rivaturner. I myself use Rivaturner..

Ste is offline  
Old 12-14-2007, 11:31 AM   #3 (permalink)
Newb Techie
Join Date: Dec 2007
Posts: 28
Default Re: OC'ing q660 on IP35 pro

Ste, I didn't say what my Vcore was trew CPU-z. I was saying my revstion / stepping. It's at 1.4575, I had it lower but was getting BSOD

I don't understand, Why does my control pannel just open then close right away? Didn't have this problem before I started OCing.. >.<
Magooly is offline  
Old 12-14-2007, 11:37 AM   #4 (permalink)
PRVRT's Avatar
Join Date: Nov 2007
Location: Blackfoot, Idaho
Posts: 379
Default Re: OC'ing q660 on IP35 pro

I prefer Rivatuner, quite simple to use once you figure it out. Not sure it supports the new G92 cards yet, but UnWinder is usually very quick about getting a new version out when new cards come out.
RivaTuner v2.06 download from Guru3D.com
PRVRT is offline  
Old 12-14-2007, 11:38 AM   #5 (permalink)
Newb Techie
Join Date: Dec 2007
Posts: 28
Default Re: OC'ing q660 on IP35 pro

Thanks, Looking at it now.
Magooly is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
*The Official Tech-Forums 3DMark06/03 Rankings* gurusan Overclocking and Modding 4265 03-29-2018 11:06 AM
Radeon X1950 Pro AGP replacement? Looby System Upgrades 20 12-13-2007 05:39 PM
Radeon x1950 pro and fatal crashes PhilST Hardware Repairs and Troubleshooting 3 11-24-2007 08:04 PM
Is now a good time to buy a macbook pro? ulater6000 Apple and Mac 13 09-22-2007 10:24 AM
OCing: X2 3600+, evga 8800, and RAM jfenwick Overclocking and Modding 45 08-25-2007 04:23 AM

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 06:59 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.