Yeah, that's kind of the conclusion we're at too and that crucial idea is our next plan once we get to what we find to be the max of his g.skill.
after sitting overnight it seems to have stabilized and now orthos runs fine at 2.5 at 1.35, i see no indication it's maxed other than the temp and he's going to pick up the freezer pro this week.
So the ram is at 677 and running around 837 at 2.0v and that bump to 2.0 was what was needed to get it stable. at 1.95 it we'd get an orthos error after 5 minutes or so but at 2.0v we were good for about 30 min ans still no errors. now playing with ht multiplier and the timings, see if we can notch those down a bit.
What affect would the multiplier have on speed between 3,4 and 5?
after sitting overnight it seems to have stabilized and now orthos runs fine at 2.5 at 1.35, i see no indication it's maxed other than the temp and he's going to pick up the freezer pro this week.
So the ram is at 677 and running around 837 at 2.0v and that bump to 2.0 was what was needed to get it stable. at 1.95 it we'd get an orthos error after 5 minutes or so but at 2.0v we were good for about 30 min ans still no errors. now playing with ht multiplier and the timings, see if we can notch those down a bit.
What affect would the multiplier have on speed between 3,4 and 5?