ive got NV silencer 6 for my 6600GT. Problem i had when i put it on was my graphics card came with the fanless heatsink so had no connector on the board for the cooler to pug onto. So Ive ended up hardwiring it to the psu molex wires.
My problem is that it only works when the red wire from the cooler is connected to the yellow 12v wire on the molex and the black wire to black wire the same. Thing is though i feel the way the air is been moved and its as if the cooler is pushing air out, ie bringing it in from the outside of the case through the heatsink and out of the cooler inside the case. I expected it to be the other way
So i switched them round and the fan just doesnt start
is everyones like that or is it just me?
AMD x2 5000+ black edition at 3.3GHZ zalman cnps 9700-NT
Gigabyte GA-M57SLI-S4 motherboard
3072mb: OCZ ddr800 gold
2x 7800GTX in SLI for 20" viewsonic
OCZ 600watt power supply
- plug for my gfs site