Novice OCer

[S0ULphIRE]

lolk, cheers
edit: got it woo!

 

[Slaymate]

Audrina is HOT

 

[MindoverMaster]

Ok, just playing a flash game, I got a BSOD of 124. I lowered the multiplier back to 20. Don't tip me over the edge, Soul. I'll pull you in as well!

Edit: Or would that just be the voltage problem?

 

[S0ULphIRE]

Yep, that'd be a sign you need moar voltage. Don't forget to stress test with LinX for a couple hours
This is how you learn to OC!

 

[MindoverMaster]

I did like 10 passes with Linx, guess that wasn't enough

I'll have another stab at it. Hope I don't hit the heart.

 

[S0ULphIRE]

Dude trust, with the voltages you're playing at you're not going to fry anything you'll do well

 

[MindoverMaster]

Yeah, I know... Keeping within Slay's instructions, since he got me this far.

 

[MindoverMaster]

Hey Soul! I cept getting BSODs a few passes on Linx. I upped the voltage by .00625 every time i see a BSOD. Well, on this Linx run, I went to 19 passes, then the red bar says "Stopped upon error after 4m 48s!" I take that is a BSOD to be? I'm currently on 1.33125v

Edit: Would moving the ICM help, too?

 

[S0ULphIRE]

Yeah I'd try increasing the IMC. Put your cpu voltage back down to 1.31875 and increase your IMC one notch

 

[Slaymate]

Yeah I'd try increasing the IMC. Put your cpu voltage back down to 1.31875 and increase your IMC one notch

the 124 error is a Memory controller Error, increase your IMC volts as Soul advised