Techist - Tech Forum

Techist - Tech Forum (http://www.techist.com/forums/)
-   Overclocking and Modding (http://www.techist.com/forums/f10/)
-   -   newly built computer will not boot (http://www.techist.com/forums/f10/newly-built-computer-will-not-boot-19736/)

Haris_P 07-02-2004 06:33 PM

newly built computer will not boot
 
I just got all of my computer parts here and hooked them all up. now when i pressed the power button, the power light goes on but the CPU fan does not spin. I'm thinking the problem is with the cpu, but not sure. any help would be appreciated.

i have a microatx 250w psu
intel celeron processor
intel motherboard

ekimirwin 07-02-2004 11:20 PM

check ur front panel connectors and their alignment on the sockets on ur mobo, ur mobo's guide should have a diagram in it. I'm almost certain this will fix ur problem, cuz i built 3 computers this weekend (mine and 2 of my friends) and these have been the only problem ive had, need help msg me on aol mikejjirwin :)

ekimirwin 07-02-2004 11:21 PM

or with 250 watts u may need a bigger psu depending on wut u have, i say about a 400-450w psu should be a standard for todays machines build by us losers.

SewerBeing 07-02-2004 11:25 PM

I'm betting its a small form factor pc, he wont be able to fit a 400w psu, the psu should be fine though. Also, try a different motherboard, that has solved quite a few problems also and check all your connections, especially the headers where the power switch went into.

Haris_P 07-03-2004 06:20 PM

i'm not running anything big. one 20gig hd, cdrom, floppy, network card, built in sound and video.. it's not my main machine.

umybiatch2k6 07-04-2004 12:41 PM

that isn't too much of a power drain. check the connections and all. the cpu can't be a problem, it doens't have much to do w/ it's fan.

Haris_P 09-23-2004 12:27 AM

hmm.... been quite some time since i touched the pc.


I'm still having the same problem as stated above. I tried disconnecting all the IDE cables and PCI cards, but nothing happens. There is a small light that turns on but that's about it. I've connected the fan to the power, still the same thing. I took the mobo out of the case, no help. I have a few pics of how it's all set up, maybe that will help.

http://shirtsngiggles.net/images/faraway_small.jpg
http://shirtsngiggles.net/images/faraway_big.jpg -far away (blown up)

http://shirtsngiggles.net/images/upclose_small.jpg
http://shirtsngiggles.net/images/upclose_big.jpg -far away (blown up)


Is there any possibility the RAM might be faulty? I have a 64MB PC100 in there.

Demalii 09-23-2004 12:51 AM

test the ram and the mobo...

Haris_P 09-23-2004 01:05 AM

How would I go doing such a thing? Replacing the mobo and the ram?

I was thinking of maybe just getting a different motherboard.

Musjunk22 09-23-2004 09:09 AM

I don't know if its just for the picture but you don't have any ram and your cpu fan isn't plugged in. I think thant might help:laughing:


All times are GMT -5. The time now is 11:43 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.