Need help getting Q6600 stable at 3.6

[Poizen22]

just got it to boot finaly. i need to lapp it soon.

 

[krazyq]

i ran 3.8, but not 3dmark stable.
i got to run 3.6 with 3dmark though.
how much cpu volt did you guys use when you got yours over 3.6?

 

[mgcook]

1.550v @ 3.9Ghz....ran through 3dmark

 

[krazyq]

1.550v @ 3.9Ghz....ran through 3dmark

hmm, 1.55 wasnt enough for me i guess, i just dont know how high should go...i dont wanna risk burning anything.

 

[PRVRT]

1.50625v @ 3.7GHz.

 

[Gabb]

1.50625v @ 3.7GHz.

wow...really pushing it to the limit in terms of volts...1.55 is the max voltage possible I believe

 

[NosBoost300]

nah, w/ the asus maximus it can go higher

 

[PRVRT]

wow...really pushing it to the limit in terms of volts...1.55 is the max voltage possible I believe

Actually my board undervolts by .02v so @ 1.50625v the real voltage is 1.48625v.

 

[NosBoost300]

my board has options up to 1.9v

 

[krazyq]

my board can go up to 2 so i might try that....JK
i think im gonna give up on oc more.
ive left it @3.2, 1.3 volt.
temps idle around 30-35 and on prime load it never got over 60