My Mod~ Cheiftec case - Page 4 - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 01-07-2006, 10:07 AM   #31 (permalink)
True Techie
Join Date: Dec 2005
Posts: 162

Originally posted by Trifid
The only way you can get the CPU below room temperature is with water cooling being included at some point. You can get a peltier - which most mini-mini fridges use, but you will need one more powerful than that, as your CPU will put out more heat than it can cool. With this, you need to get a peltier, attatch it to the top of your CPU - cool side facing it- and then attatch watercooling to the peltier to cool that down. and I believe you need to surround it all in foam and silicon.

Or you could do the chilled watercooling way, where I assume they have a fridge motor somewhere in it. look at xtreme systems

Anyway, start off with the case mod.
i plan to but yea, i figured that i would go ahead and rule the fridge out for now.

i wasent planning on useing just the fridge for cooling btw. i wasjust gona use it too cool it off a little bit xtra

EndofSanity is offline  
Old 01-07-2006, 11:40 PM   #32 (permalink)
Ultra Techie
Join Date: Nov 2004
Posts: 711

ive been using my tube fromt he outside and its drawing in super cold air for about 2 weeks now and my case temps are at about 19celsius and my gpu is at about 30c i havent seen any condensation in it yet. alittle more dust than usual but no condensation yet. but i am prolly going to take it out soon. it was more of a experiment then a permanent thhing.

æArchOAngelæ is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 10:54 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.