Modding Question - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Overclocking and Modding
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 07-01-2004, 07:59 PM   #1 (permalink)
Super Techie
Join Date: Feb 2004
Posts: 261
Default Modding Question

I am going to start my first mod this weekend and I have a question.

I am going to to make a large window in one of my side panels and I am going to use a Dremel to cut it out.

I hear people talking about using a ton of cutting disks but their designs seem to be kind of complex. If I am just cutting out a big square is there some kind of bit that I can use so I dont have to use like 50 cutting wheels?

and the cut doesnt have to be super smooth or anything because I could just sand it down to make is smooth. Thanks!

dbernie41 is offline  
Old 07-01-2004, 08:50 PM   #2 (permalink)
Ultra Techie
Join Date: Apr 2004
Posts: 527

Yah dremels are good for not so hard objects and small stuff but for a big side panel i would use a jigsaw with a metal cutting blade. Cut a whole a couple inches from the outside then start cutting it out. If need by smooth it down with the dremel the finally with some sandpaper. When doing all this your going to want a few layers of masking tape (blue, green, beige) on the top and bottom of the panel to prevent from scratching. Unless you are repainting.

P4 2.26 ghz, Intel d850emv2 mobo, 768mb of pc800, sony 4x dvd-rw, teac burner, nvidia ti4600 graphics, enermax 330watt ps
4 silent uv fans, cold cathodes in full tower antec case, round ide cables

SOny vaio 2.66 ht ghz modded into raidmax case with green cold cathodes.
P4 2.8ghz HT, 512mb ddr, Intel KD865gbfl, onboard video, raidmax case, blue cathodes, round ide, loomed wires, 4x dvd burner, wd sata 80gb hard drive
Intel d865perl, 2.8ghz northwood, antec sonata, wd caviar 20gb, Corsair 512mbx1 for now. 380watt psu, ati 9600, dvdrom cdrw floppy in black too match case
mrzeeedler is offline  
Old 07-06-2004, 07:30 PM   #3 (permalink)
Super Techie
Join Date: May 2004
Posts: 372

it also depends on what ur case is made out of if its steel good luck but if its aluminum it should be reletivly easy to cut using a dremel or the above mentioned tools and besides u can get a little thing of 50 disks for like $3

<i>Never underestimate the power of stupid people in large groups</i>
Gl\l0m!$h is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 12:34 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.